1. The entire project will be completed within 1-2 hours.
2. Be sure to thoroughly clean the wheel rim and air dry it completely, so that the wheel rim paint attached to it will last for a long time.
3. The valve mouth must be tightly wrapped with tape to avoid painting, which may affect normal inflation and aesthetics.
4. The balance block can be removed separately, its position recorded, cleaned separately, and sprayed separately. After completion, it can be reinstalled back to its original position, which has no impact on tire balance and a beautiful effect.
5. The spraying of wheel rim paint must be carried out indoors to avoid the interference of wind and dust, and to ensure the spraying effect by avoiding the phenomenon of natural "rough surface" on the surface.
6. When spraying wheel rim paint, it is necessary to create a "newspaper house" on the outer edge of the wheel rim, so that the spraying effect is more saturated and comprehensive, while avoiding the interference of paint mist on the tire.
7. The wheel rim needs to be sprayed with wheel rim paint at least three times to achieve good saturation effect, and finally, it must be sprayed with gloss oil to achieve good brightening effect.
8. Before each spraying, it is necessary to ensure that the previous wheel rim paint is completely dry, otherwise it will affect the saturation of the paint surface.
9. After all the wheel rim painting is completed, do not wash the vehicle for at least 72 hours to avoid damage to the wheel rim paint surface by high-pressure water guns.