Wheel Rim Solutions For Underground Mining Equipment

Nov 20, 2026 Leave a message

Underground mining conditions are much tougher than open-pit sites. Tunnels are narrow, the ground is covered with sharp rocks and holes, and the air stays wet all the time. LHD scooptrams and underground haul trucks often bump into rock walls and loose ore. Standard wheel rims tend to bend, crack or lose air quickly in such environments. Anqiang has developed practical rim solutions specially made for underground mining work.

 

Common problems underground

  • Constant sharp impacts: Machines keep scraping rock walls and rolling over broken ore. Tiny cracks easily start at welds and curved areas.
  • Wet and muddy environment: Mine water, mud and mild acid speed up rust. Rust wears down the metal and breaks the seal between rim and tire bead.
  • Hard to maintain: There is little room inside tunnels fo tire repair and rim checks. If the lock ring gets stuck or the rim is hard to take apart, you will face long work stops.
  • Repeated heavy loads: LHDs carry ore back and forth nonstop. Rims will fail from fatigue quickly if the steel and structure are not suitable.

 

Anqiang's rim solutions for underground use

We mainly provide multi-piece split rims (5-piece type) for underground loaders and small mining trucks. The assembly includes rim base, lock ring, side ring and sealing accessories.

1. Tough mining steel

We choose low alloy steel with good impact resistance, not just high strength. The material can take sudden rock hits without breaking in a brittle way. Every batch of raw steel is tested before production.

2. Reinforced flange and smooth bead seat

We thicken parts that take most stress and use large rounded corners to reduce stress build-up. Precisely machined bead seats keep the tire sealed well, keeping mud and water out.

3. Reliable lock ring design

The lock ring fits firmly and will not move under impact. This prevents sudden air leakage or ring ejection, which is a major safety risk underground.

4. Split structure for easy service in narrow tunnels

Our multi-piece rims can be taken apart without large special tools. Your workers can change tires faster and save time in tight tunnels. We support both tube and tubeless tire options.

5. Heavy-duty anti-rust paint

We apply strong protective coating to handle humid mine air. If the coating gets scratched on site, you can touch it up easily to slow rusting.

 

What we offer for underground projects

We do not only sell fixed sizes. Send us your machine model, tire size and site conditions, and our technical team will match the right steel grade and rim structure. All key welds go through UT and MT inspection to find hidden flaws before shipment.

If your existing rims keep cracking underground, you can send us failure photos. We will check and give you improvement advice.