6.00‑17.5 steel wheel rims are widely fitted on light dumpers, agricultural carriers and short-distance engineering vehicles. The rim follows standard dimension requirements and matches corresponding tire sizes. Anqiang manufactures this rim for different off-road and transport applications.
Manufacturing Specifications
The rim blank is cut and formed according to standard drawing dimensions. Roll forming shapes the rim profile, and welding connects the rim sections. All weld zones go through visual inspection and non-destructive testing.
Dimensional checks cover rim width, diameter, offset and bead seat tolerance. These parameters stay within standard limits to ensure tire mounting and seating.
After forming and welding, the rim gets surface treatment to reduce surface oxidation. Bolt holes are machined to match standard hub mounting patterns. Each finished unit is checked for runout before packing.
Practical Advantages
1. Standardized dimension for easy tire matching
The 6.00‑17.5 rim follows industry standard sizes. It fits common tire models without modification. Replacement tires and spare rims can be sourced easily at job sites.
2. Consistent structure under cyclic load
Roll forming and controlled welding reduce internal defects. The rim maintains structure under repeated load from uneven ground. It reduces deformation risk during normal operation.
3. Simple maintenance on site
Steel rim structure allows visual inspection. Operators check weld lines, bead seat and bolt holes during routine service. Damaged parts can be replaced separately instead of changing the whole assembly.
4. Stable supply for fleet replacement
Standard design supports mass production. Project fleets can arrange spare rim inventory for regular rotation. Lead time for batch orders stays predictable.
On-site Usage Notes
Check tire pressure before operation. Overload increases stress on the rim and speeds up damage. Inspect weld areas and bead seats after driving on rough roads. Stop operation if cracks or deformation appear.
Standard 6.00‑17.5 steel wheel rims are built with fixed manufacturing controls on dimension, welding and surface treatment. Standard sizing brings convenience in tire matching, part replacement and fleet maintenance. It works well for light engineering and transport vehicles.
Anqiang produces standard 6.00‑17.5 steel wheel rims. We provide batch supply and support inspection records for fleet buyers.
Contact Anqiang to receive specification sheets and pricing information.